Complete WAEC Syllabus for Radio Television and Electronic Works 2023, Text Books, and Topics

You must study the WAEC Radio Television and Electronic Works course in order to take the test. The format, notes, and goals for the Radio, Television, and Electronic Works exam are all included.

For exam preparation, you must study the Radio, Television, and Electronics Work course. You can use it as a guide to help you decide which topics to read about. Additionally, there are notes on ideas that you ought to learn carefully.

Exam preparation without the aid of the Radio, Television, and Electronics Works is equivalent to visiting a farm without your farm equipment. You won’t be effective in the end.

Make sure to use the syllabus when you start your exam preparations.

The West African Examination Council’s Radio, Television, and Electronics Works and suggested textbooks are included in this post (WAEC).

WAEC Radio Television and Electronics Works


The Senior Secondary School curriculum for Trade Subjects served as the foundation for this exam syllabus.

Its goals include educating applicants about the world of radio, television, and electronics works, enhancing their attitude toward maintaining and repairing such equipment, and enabling them to understand how science and technology are related.


The objective of the syllabus is to test the candidates’ knowledge and understanding of the following:

  • Workshop Safety Rules and Regulations;
  • Basic Electricity;
  • Electronic Tools and Instruments;
  • Electronic Devices and Circuits;
  • Electronic Communication Systems;
  • Workshop Practice and Maintenance;
  • Entrepreneurship in Radio, Television and Electronics Works.

Examination Scheme

Papers 1, 2, and 3 are the three required papers that must all be taken. A composite paper consisting of Papers 1 and 2 must be taken in one session.

The first paper will include forty multiple-choice objective questions that must all be answered in 45 minutes for a total of 40 points.

The second paper will have six concise, well-structured questions. Candidates will have one hour to respond to any four questions for 60 points.

A two-hour practical test will be part of PAPER 3. Three skill-based questions will be included, and applicants must correctly answer two of them to receive 90 points.

Schools must get a list of the test materials at least two weeks prior to the exam date so that they can make the necessary preparations and purchases.

Alternative to Practical Work

Alternatively, the Council may consider assessing candidates’ level of theoretical proficiency with the practical skills outlined in the syllabus in the case that materials for the actual practical test cannot be obtained.

There will be two mandatory questions for this alternate test, which must be completed correctly for 100 points in two hours.

Industrial Attachment

The applicants should do this during the extended break between their SS II and III course. Their subject teachers will oversee and grade it. It will receive 10 points.

WAEC Radio Television and Electronics Works Syllabus

Workshop Safety Rules and Regulations

  1. Sources and Prevention of Hazards
  1. Safety Checks in Servicing Radio Receiver
  1. Safety Precautions in Television Workshop

2. Basic Electricity

2.1 Structure of matter

2.2 Conductors, insulators and semiconductors

2.3 Current, voltage and resistance

2.4 Electronic components

2.5 Resistors and Capacitors

2.6 Kirchhoff’s  Current and Voltage Laws

2.7 Diodes and Transistors

2.8 Battery

2.9 Ohm’s law

2.10 Electric power

2.11 Direct and Alternating Current

2.12 Alternating waveform

3. Electronic Tools and Instruments

3.1 Electronic hand tools

3.2 Electronic measuring instruments

3.3 Fault Finding Equipment

4. Electronics Devices and Circuits

4.1 Meaning of Electronics and Electronic circuit

4.2 Concept of emission and photoelectric devices

4.3 Semiconductors devices

4.4 Power Supply Unit

4.5 Amplifiers

4.6 Resistive, Inductive, Capacitive (RLC) circuits

4.7 Feedback

4.8 Oscillators and Multivibrators

5. Electronic Communication Systems

5.1 Electronic Communication Systems

5.2 Electromagnetic spectrum

5.3 Transducer

5.4 Modulation and demodulation

5.5 Radio transmitter and receiver

5.6 Selectivity and sensitivity

5.7 Resonant circuit

5.8 Satellite Communication Systems

5.9 Television Transmitter

5.10 Image and Sound Reproduction in TV receiver

5.11 Monochrome Television Receiver

5.12 Principles of operation of Colour Television Receiver

5.13 Principle of Colour Signal, Transmission and Reception

6. Workshop Practice and Maintenance

6.1 Soldering and Desoldering in Electronic Circuits

6.2 Electronic Repairs

6.3 Fault finding and repairs in radio receiver

6.4 Electronic Measuring Instruments

6.5 Diagnosis and Repair of Black and White TV Receiver

6.6 Diagnose and Repair of a Colour Television Receiver

7. Entrepreneurship in Radio, Television and Electronic Works

7.1 Business Management and Finance

7.2 Customer Relations

7.3 Business Opportunities in Radio, TV and Electronics works

Facilities and Equipment


  • Screw drivers
  • Diagonal cutters
  • Soldering gun,iron and lead
  • Desoldering tools
  • Pocket knife
  • Stripper
  • Semiconductor diodes
  • Digital and analog multimeters
  • Loudspeaker, microphone
  • Cathode Ray Tube/LCD
  • Nose pliers
  • Old electronics panel
  • Resistors, capacitors, inductors, transistors
  • Vero board/breadboard
  • D.C. power supplies
  • Transformers
  • Radio and television sets
  • Oscilloscope
  • Signal generator
  • Magnifying glass
  • Pattern generator (TV)



Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top